Show Interfaces History - Edge-Core ECS4810-12M Layer 2 Management Manual

This command displays statistical history for the specified interfaces.
show interfaces
history
D
EFAULT
Shows historical statistics for all interfaces, intervals, ingress traffic, and
egress traffic.
C
OMMAND
Privileged Exec
C
OMMAND
If no interface is specified, information on all interfaces is displayed. For a
description of the items displayed by this command, see
Trunk Statistics" on page
E
XAMPLE
This example shows the statistics recorded for all named entries in the
sampling table.
Console#show interfaces history ethernet 1/1
Interface
Name
Interval
Buckets Requested : 15
Buckets Granted
Status
Current Entries
Start Time
------------ --------------- ------------- ------------- -------------
00d 02:50:52
show interfaces history [interface [name [current |
previous index count] [input | output]]]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12)
port-channel channel-id (Range: 1-12)
name - Name of sample as defined in the
(Range: 1-32 characters)
current - Statistics recorded in current interval.
previous - Statistics recorded in previous intervals.
index - An index into the buckets containing previous samples.
(Range: 1-96)
count - The number of historical samples to display. (Range: 1-96)
input - Ingress traffic.
output - Egress traffic.
S
ETTING
M
ODE
U
SAGE
142.
: Eth 1/ 1
: 1min
: 1 minute(s)
: 15
: Active
Octets Input
15059355
– 835 –
C 28
HAPTER
history
Unicast Multicast
80275 43750
| Interface Commands
command.
"Showing Port or
Broadcast
2304