Displaying Igmp Snooping Statistics; Figure 328: Showing Multicast Groups Learned By Igmp Snooping - Edge-Core ECS4810-12M Layer 2 Management Manual

| Multicast Filtering
C 18
HAPTER
Layer 2 IGMP (Snooping and Query)
D IGMP
ISPLAYING
S S
NOOPING TATISTICS
W I
EB NTERFACE
To show multicast groups learned through IGMP snooping:
Click Multicast, IGMP Snooping, Forwarding Entry.
1.
Select the VLAN for which to display this information.
2.

Figure 328: Showing Multicast Groups Learned by IGMP Snooping

Use the Multicast > IGMP Snooping > Statistics pages to display IGMP
snooping protocol-related statistics for the specified interface.
CLI R
EFERENCES
"show ip igmp snooping statistics" on page 1026
◆
P
ARAMETERS
These parameters are displayed:
VLAN – VLAN identifier. (Range: 1-4093)
◆
◆ Port – Port identifier. (Range: 1-12)
Trunk – Trunk identifier. (Range: 1-12)
◆
Query Statistics
Querier IP Address – The IP address of the querier on this interface.
◆
◆ Querier Expire Time – The time after which this querier is assumed to
have expired.
General Query Received – The number of general queries received
◆
on this interface.
General Query Sent – The number of general queries sent from this
◆
interface.
– 546 –