Figure 16: Console Port Settings - Edge-Core ECS4810-12M Layer 2 Management Manual

The password for the console connection can only be configured
N :
OTE
through the CLI (see "password" on page
Password checking can be enabled or disabled for logging in to the
N :
OTE
console connection (see
authentication by a single global password as configured for the password
command, or by passwords set up for specific user-name accounts. The
default is for local passwords configured on the switch.
W I
EB NTERFACE
To configure parameters for the console port:
Click System, then Console.
1.
Specify the connection parameters as required.
2.
Click Apply
3.

Figure 16: Console Port Settings

– 123 –
C
HAPTER
627).
"login" on page 625). You can select
| Basic Management Tasks
4
Configuring The Console Port