Lldp Med-Location Civic-Addr; Table 154: Lldp Med Location Ca Types - Edge-Core ECS4810-12M Layer 2 Management Manual

Hide thumbs Also See for ECS4810-12M Layer 2:
Table of Contents

Advertisement

| LLDP Commands
C
40
HAPTER
lldp med-location
civic-addr
This command configures an LLDP-MED-enabled port to advertise its
location identification details. Use the no form to restore the default
settings.
S
YNTAX
lldp med-location civic-addr [[country country-code] |
[what device-type] | [ca-type ca-value]]
no lldp med-location civic-addr [[country] | [what] | [ca-type]]
country-code – The two-letter ISO 3166 country code in capital
ASCII letters. (Example: DK, DE or US)
device-type – The type of device to which the location applies.
0 – Location of DHCP server.
1 – Location of network element closest to client.
2 – Location of client.
ca-type – A one-octet descriptor of the data civic address value.
(Range: 0-255)
ca-value – Description of a location. (Range: 1-32 characters)
D
S
EFAULT
ETTING
Not advertised
No description
C
M
OMMAND
ODE
Interface Configuration (Ethernet, Port Channel)
C
U
OMMAND
SAGE
Use this command without any keywords to advertise location
identification details.
Use the ca-type to advertise the physical location of the device, that is
the city, street number, building and room information. The address
location is specified as a type and value pair, with the civic address (CA)
type being defined in RFC 4776. The following table describes some of
the CA type numbers and provides examples.

Table 154: LLDP MED Location CA Types

CA Type Description
1
National subdivisions (state, canton, province)
2
County, parish
3
City, township
4
City division, borough, city district
5
Neighborhood, block
6
Group of streets below the neighborhood level
– 1082 –
CA Value Example
California
Orange
Irvine
West Irvine
Riverside
Exchange

Advertisement

Table of Contents
loading

Table of Contents