Snmp-Server Enable Port-Traps Atc Multicast-Control-Apply; Snmp-Server Enable Port-Traps Atc Multicast-Control-Release - Edge-Core ECS4810-12M Layer 2 Management Manual

snmp-server enable
port-traps atc
multicast-control-
apply
snmp-server enable
port-traps atc
multicast-control-
release
R C
ELATED OMMANDS
auto-traffic-control alarm-fire-threshold (876)
This command sends a trap when multicast traffic exceeds the upper
threshold for automatic storm control and the apply timer expires. Use the
no form to disable this trap.
S
YNTAX
[no] snmp-server enable port-traps atc multicast-control-apply
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Interface Configuration (Ethernet)
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#snmp-server enable port-traps atc multicast-control-apply
Console(config-if)#
R C
ELATED OMMANDS
auto-traffic-control alarm-fire-threshold (876)
auto-traffic-control apply-timer (872)
This command sends a trap when multicast traffic falls beneath the lower
threshold after a storm control response has been triggered and the
release timer expires. Use the no form to disable this trap.
S
YNTAX
[no] snmp-server enable port-traps atc
multicast-control-release
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Interface Configuration (Ethernet)
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#snmp-server enable port-traps atc multicast-control-
release
Console(config-if)#
– 881 –
| Automatic Traffic Control Commands
C 32
HAPTER