(Mac Acl) - Edge-Core ECS4810-12M Layer 2 Management Manual

R
ELATED
permit, deny (807)
mac access-group (809)
show mac access-list (810)
This command adds a rule to a MAC ACL. The rule filters packets matching
permit, deny
a specified MAC source or destination address (i.e., physical layer address),

(MAC ACL)

or Ethernet protocol type. Use the no form to remove a rule.
S
YNTAX
{permit | deny}
no {permit | deny}
The default is for Ethernet II packets.
N :
OTE
{permit | deny} tagged-eth2
no {permit | deny} tagged-eth2
{permit | deny} untagged-eth2
no {permit | deny} untagged-eth2
{permit | deny} tagged-802.3
no {permit | deny} tagged-802.3
C
OMMANDS
{any | host source | source address-bitmask}
{any | host destination | destination address-bitmask}
[vid vid vid-bitmask] [ethertype protocol [protocol-bitmask]]
[time-range time-range-name]
{any | host source | source address-bitmask}
{any | host destination | destination address-bitmask}
[vid vid vid-bitmask] [ethertype protocol [protocol-bitmask]]
{any | host source | source address-bitmask}
{any | host destination | destination address-bitmask}
[vid vid vid-bitmask] [ethertype protocol [protocol-bitmask]]
[time-range time-range-name]
{any | host source | source address-bitmask}
{any | host destination | destination address-bitmask}
[vid vid vid-bitmask] [ethertype protocol [protocol-bitmask]]
{any | host source | source address-bitmask}
{any | host destination | destination address-bitmask}
[ethertype protocol [protocol-bitmask]]
[time-range time-range-name]
{any | host source | source address-bitmask}
{any | host destination | destination address-bitmask}
[ethertype protocol [protocol-bitmask]]
{any | host source | source address-bitmask}
{any | host destination | destination address-bitmask}
[vid vid vid-bitmask] [time-range time-range-name]
{any | host source | source address-bitmask}
{any | host destination | destination address-bitmask}
[vid vid vid-bitmask]
– 807 –
| Access Control Lists
C 27
HAPTER
MAC ACLs