Configuring Rmon History Samples; Figure 245: Showing Configured Rmon Events - Edge-Core ECS4810-12M Layer 2 Management Manual

Hide thumbs Also See for ECS4810-12M Layer 2:

Table of Contents

To show configured RMON events:

Click Administration, RMON.

Select Configure Global from the Step list.

Select Show from the Action list.

Click Event.

Use the Administration > RMON (Configure Interface - Add - History) page

to collect statistics on a physical interface to monitor network utilization,

packet types, and errors. A historical record of activity can be used to track

down intermittent problems. The record can be used to establish normal

baseline activity, which may reveal problems associated with high traffic

levels, broadcast storms, or other unusual events. It can also be used to

predict network growth and plan for expansion before your network

becomes too overloaded.

"Remote Monitoring Commands" on page 677

Each index number equates to a port on the switch.

If history collection is already enabled on an interface, the entry must

be deleted before any changes can be made.

The information collected for each sample includes:

input octets, packets, broadcast packets, multicast packets, undersize

packets, oversize packets, fragments, jabbers, CRC alignment errors,

collisions, drop events, and network utilization.

For a description of the statistics displayed on the Show Details page,

"Showing Port or Trunk Statistics" on page

| Basic Administration Protocols

Remote Monitoring

Troubleshooting