Displaying Lldp Remote Port Information; Table 27: Port Id Subtype - Edge-Core ECS4810-12M Layer 2 Management Manual

Hide thumbs Also See for ECS4810-12M Layer 2:

Table of Contents

Use the Administration > LLDP (Show Remote Device Information) page to

display information about devices connected directly to the switch's ports

which are advertising information through LLDP, or to display detailed

information about an LLDP-enabled device connected to a specific port on

the local switch.

These parameters are displayed:

Port Details

"show lldp info remote-device" on page 1089

Local Port – The local port to which a remote LLDP-capable device is

Chassis ID – An octet string indicating the specific identifier for the

particular chassis in this system.

Port ID – A string that contains the specific identifier for the port from

which this LLDPDU was transmitted.

System Name – A string that indicates the system's administratively

assigned name.

Local Port – The local port to which a remote LLDP-capable device is

Chassis Type – Identifies the chassis containing the IEEE 802 LAN

entity associated with the transmitting LLDP agent. There are several

ways in which a chassis may be identified and a chassis ID subtype is

used to indicate the type of component being referenced by the chassis

ID field. (See

Table 25, "Chassis ID Subtype," on page

Chassis ID – An octet string indicating the specific identifier for the

particular chassis in this system.

System Name – A string that indicates the system's assigned name.

System Description – A textual description of the network entity.

Port Type – Indicates the basis for the identifier that is listed in the

Port ID field.

Interface alias

IfAlias (IETF RFC 2863)

Chassis component

EntPhysicalAlias when entPhysClass has a value of 'chassis(3)'

(IETF RFC 2737)

| Basic Administration Protocols

Link Layer Discovery Protocol

Troubleshooting