Showing Vlan Statistics; Figure 73: Showing The Members Of A Dynamic Vlan - Edge-Core ECS4810-12M Layer 2 Management Manual

Hide thumbs Also See for ECS4810-12M Layer 2:

Table of Contents

| VLAN Configuration

IEEE 802.1Q VLANs

To show the members of a dynamic VLAN:

Click VLAN, Dynamic.

Select Show Dynamic VLAN from the Step list.

Select Show VLAN Members from the Action list.

Use the VLAN > Statistics page to display statistics on network traffic from

the Interfaces Group. These statistics display the number of octets and

packets received. All values displayed have been accumulated since the

last system reboot, and are shown as counts per second. Statistics are

refreshed every 60 seconds by default.

"show interfaces counters" on page 833

These parameters are displayed:

Received Octets – The total number of octets received on the

interface, including framing characters.

Received Packets – The number of subnetwork-unicast packets

delivered to a higher-layer protocol.

To show interface statistics for a VLAN:

Click VLAN, Statistics.

Select a VLAN from the drop-down list.

Troubleshooting