Show Port Security; Table 83: Show Port Security - Display Description - Edge-Core ECS4810-12M Layer 2 Management Manual

| General Security Measures
C 26
HAPTER
Port Security

show port security

This command displays port security status and the secure address count.
S
YNTAX
show port security [interface interface]
interface - Specifies a port interface.
ethernet unit/port
unit - This is unit 1.
port - Port number. (Range: 1-28)
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
This example shows the port security settings and number of secure
addresses for all ports.
Console#show port security
Global Port Security Parameters
Secure MAC Aging Mode : Disabled
Port Security Port Summary
Port Port Security Port Status
--------------------------------------------------------------------------
Eth 1/ 1 Disabled
Eth 1/ 2 Enabled
Eth 1/ 3 Disabled
Eth 1/ 4 Disabled
Eth 1/ 5 Disabled
Eth 1/ 6 Disabled
Eth 1/ 7 Disabled
Eth 1/ 8 Disabled
Eth 1/ 9 Disabled
Eth 1/10 Disabled
Eth 1/11 Disabled
Eth 1/12 Disabled
Console#

Table 83: show port security - display description

Field Description
Port Security The configured status (enabled or disabled).
Port Status The operational status:
Secure/Down – Port security is disabled.
◆
Secure/Up – Port security is enabled.
◆
Shutdown – Port is shut down due to a response to a port security
◆
violation.
Intrusion Action The configured intrusion response.
MaxMacCnt The maximum number of addresses which can be stored in the address
table for this interface (either dynamic or static).
CurrMacCnt The current number of secure entries in the address table.
– 748 –
Intrusion Action
Secure/Down None
Secure/Up None
Secure/Down None
Secure/Down None
Secure/Down None
Secure/Down None
Secure/Down None
Secure/Down None
Secure/Down None
Secure/Down None
Secure/Down None
Secure/Down None
MaxMacCnt CurrMacCnt
0 2
10 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0