Mapping Cos Priorities To Internal Dscp Values; Figure 123: Configuring Dscp To Dscp Internal Mapping - Edge-Core ECS4810-12M Layer 2 Management Manual

Figure 123: Configuring DSCP to DSCP Internal Mapping

To show the DSCP to internal PHB/drop precedence map:
Click Traffic, Priority, DSCP to DSCP.
1.
Select Show from the Action list.
2.
Select a port.
3.
Figure 124: Showing DSCP to DSCP Internal Mapping
Use the Traffic > Priority > CoS to DSCP page to maps CoS/CFI values in
M C S
APPING O
incoming packets to per-hop behavior and drop precedence values for
P
RIORITIES TO
priority processing.
I DSCP
NTERNAL
V
ALUES
CLI R
"qos map cos-dscp" on page 978
◆
C
OMMAND
The default mapping of CoS to PHB values is shown in
◆
page
Enter up to eight CoS/CFI paired values, per-hop behavior and drop
◆
precedence.
EFERENCES
U
SAGE
254.
– 253 –
| Class of Service
C 11
HAPTER
Layer 3/4 Priority Settings
Table 18 on