Dot1X Max-Reauth-Req; Dot1X Max-Req - Edge-Core ECS4810-12M Layer 2 Management Manual

| Authentication Commands
C 25
HAPTER
802.1X Port Authentication
dot1x max-reauth-
req

dot1x max-req

E
XAMPLE
Console(config)#interface eth 1/2
Console(config-if)#dot1x intrusion-action guest-vlan
Console(config-if)#
This command sets the maximum number of times that the switch sends
an EAP-request/identity frame to the client before restarting the
authentication process. Use the no form to restore the default.
S
YNTAX
dot1x max-reauth-req count
no dot1x max-reauth-req
count – The maximum number of requests (Range: 1-10)
D
EFAULT
2
C M
OMMAND ODE
Interface Configuration
E
XAMPLE
Console(config)#interface eth 1/2
Console(config-if)#dot1x max-reauth-req 2
Console(config-if)#
This command sets the maximum number of times the switch port will
retransmit an EAP request/identity packet to the client before it times out
the authentication session. Use the no form to restore the default.
S
YNTAX
dot1x max-req count
no dot1x max-req
count – The maximum number of requests (Range: 1-10)
D
EFAULT
2
C M
OMMAND ODE
Interface Configuration
– 730 –