Figure 109: Displaying Global Settings For An Mst Instance - Edge-Core ECS4810-12M Layer 2 Management Manual

To display global settings for MSTP:
Click Spanning Tree, MSTP.
1.
Select Configure Global from the Step list.
2.
Select Show Information from the Action list.
3.
Select an MST ID. The attributes displayed on this page are described
4.
under "Displaying Global Settings for STA" on page

Figure 109: Displaying Global Settings for an MST Instance

To add additional VLAN groups to an MSTP instance:
Click Spanning Tree, MSTP.
1.
Select Configure Global from the Step list.
2.
Select Add Member from the Action list.
3.
Select an MST instance from the MST ID list.
4.
Enter the VLAN group to add to the instance in the VLAN ID field. Note
5.
that the specified member does not have to be a configured VLAN.
Click Apply
6.
Figure 110: Adding a VLAN to an MST Instance
– 235 –
| Spanning Tree Algorithm
C 8
HAPTER
Configuring Multiple Spanning Trees
224.