Figure 47: Enabling Lacp On A Port - Edge-Core ECS4810-12M Layer 2 Management Manual

Figure 47: Enabling LACP on a Port

To configure LACP parameters for group members:
Click Interface, Trunk, Dynamic.
1.
Select Configure Aggregation Port from the Step list.
2.
Select Configure from the Action list.
3.
Click Actor or Partner.
4.
Configure the required settings.
5.
Click Apply.
6.
Figure 48: Configuring LACP Parameters on a Port
– 159 –
| Interface Configuration
C 5
HAPTER
Trunk Configuration