Table of Contents
Advertisement
When specifying the priority sequence for a sever, the server index
must already be defined (see
Authentication" on page
W
I
EB
NTERFACE
To configure the parameters for RADIUS or TACACS+ authentication:
Click Security, AAA, Server.
1.
Select Configure Server from the Step list.
2.
Select RADIUS or TACACS+ server type.
3.
Select Global to specify the parameters that apply globally to all
4.
specified servers, or select a specific Server Index to specify the
parameters that apply to a specific server.
To set or modify the authentication key, mark the Set Key box, enter
5.
the key, and then confirm it
Click Apply.
6.
Figure 142: Configuring Remote Authentication Server (RADIUS)
– 285 –
C
HAPTER
AAA Authorization and Accounting
"Configuring Local/Remote Logon
281).
| Security Measures
14
Advertisement
Table of Contents
Troubleshooting
