Output Modifiers; Cli Command Groups; Table 42: Command Group Index - Edge-Core ECS4810-12M Layer 2 Management Manual

Hide thumbs Also See for ECS4810-12M Layer 2:

Table of Contents

VLAN M'cast Router Ports Type

---- ------------------- -------

Some of the show commands include options for output modifiers. For

example, the "show running-config" command includes the following

keyword options:

Console#show running-config ?

| Output modifiers

The output modifiers include options which indicate a string that occurs at

the beginning of a line, in lines that are to be excluded, or in lines that are

to be included.

Console#show running-config | ?

Begin with line that matches

Exclude lines that match

Include lines that match

Note that the output modifier begin can only be used as the first modifier if

more than one modifier is used in a command.

The system commands can be broken down into the functional groups

Command Group

Basic commands for entering privileged access mode,

restarting the system, or quitting the CLI

System Management

Display and setting of system information, basic modes

of operation, maximum frame size, file management,

console port and telnet settings, system logs, SMTP

alerts, the system clock, and switch clustering

Simple Network

Activates authentication failure traps; configures

Management Protocol

community access strings, and trap receivers

Remote Monitoring

Supports statistics, history, alarm and event groups

Flow Sampling

Samples traffic flows, and forwards data to designated

| Using the Command Line Interface