Show Interfaces Status - Edge-Core ECS4810-12M Layer 2 Management Manual

| Interface Commands
C 28
HAPTER
show interfaces
status
This command displays the status for an interface.
S
YNTAX
show interfaces status [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12)
port-channel channel-id (Range: 1-12)
vlan vlan-id (Range: 1-4093)
D S
EFAULT ETTING
Shows the status for all interfaces.
C M
OMMAND ODE
Normal Exec, Privileged Exec
C U
OMMAND SAGE
If no interface is specified, information on all interfaces is displayed. For a
description of the items displayed by this command, see
Connection Status" on page
E
XAMPLE
Console#show interfaces status ethernet 1/1
Information of Eth 1/1
Basic Information:
Port Type
MAC Address
Configuration:
Name
Port Admin
Speed-duplex
Capabilities
Broadcast Storm
Broadcast Storm Limit
Multicast Storm
Multicast Storm Limit
Unknown Unicast Storm
Unknown Unicast Storm Limit : 64 Kbits/second
Flow Control
VLAN Trunking
LACP
Port Security
Max MAC Count
Port Security Action
Media Type
Current Status:
Link Status
Port Operation Status
Operation Speed-duplex : 100full
Flow Control Type
Console#
– 838 –
135.
: 100TX
: 00-E0-0C-00-00-FE
:
: Up
: Auto
: 10half, 10full, 100half, 100full
: Enabled
: 500 packets/second
: Disabled
: 64 Kbits/second
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: 0
: None
: Copper forced
: Up
: Up
: None
"Displaying