Figure 244: Configuring An Rmon Event - Edge-Core ECS4810-12M Layer 2 Management Manual

| Basic Administration Protocols
C 15
HAPTER
Remote Monitoring
Log and Trap – Logs the event and sends a trap message.
■
Community – A password-like community string sent with the trap
◆
operation to SNMP v1 and v2c hosts.
Although the community string can be set on this configuration page, it
is recommended that it be defined on the SNMP trap configuration page
(see "Setting Community Access Strings" on page
configuring it here. (Range: 1-127 characters)
Description – A comment that describes this event. (Range: 1-127
◆
characters)
Owner – Name of the person who created this entry. (Range: 1-127
◆
characters)
W I
EB NTERFACE
To configure an RMON event:
Click Administration, RMON.
1.
Select Configure Global from the Step list.
2.
Select Add from the Action list.
3.
Click Event.
4.
Enter an index number, the type of event to initiate, the community
5.
string to send with trap messages, the name of the person who created
this event, and a brief description of the event.
Click Apply
6.

Figure 244: Configuring an RMON Event

– 428 –
413) prior to