Logging Sendmail Source-Email; Show Logging Sendmail - Edge-Core ECS4810-12M Layer 2 Management Manual

| System Management Commands
C 21
HAPTER
SMTP Alerts
logging sendmail
source-email
show logging
sendmail
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
You can specify up to five recipients for alert messages. However, you must
enter a separate command to specify each recipient.
E
XAMPLE
Console(config)#logging sendmail destination-email ted@this-company.com
Console(config)#
This command sets the email address used for the "From" field in alert
messages. Use the no form to restore the default value.
S
YNTAX
logging sendmail source-email email-address
no logging sendmail source-email
email-address - The source email address used in alert messages.
(Range: 1-41 characters)
D S
EFAULT ETTING
None
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
You may use an symbolic email address that identifies the switch, or the
address of an administrator responsible for the switch.
E
XAMPLE
Console(config)#logging sendmail source-email bill@this-company.com
Console(config)#
This command displays the settings for the SMTP event handler.
C M
OMMAND ODE
Normal Exec, Privileged Exec
E
XAMPLE
Console#show logging sendmail
SMTP servers
-----------------------------------------------
192.168.1.19
– 642 –