Ip Ssh Server-Key Size - Edge-Core ECS4810-12M Layer 2 Management Manual

C
OMMAND
Global Configuration
C
OMMAND
◆
◆
◆
E
XAMPLE
R
ELATED
ip ssh crypto host-key generate (723)
show ssh (726)
This command sets the SSH server key size. Use the no form to restore the
ip ssh server-key
default setting.
size
S
YNTAX
D
EFAULT
768 bits
C
OMMAND
Global Configuration
C
OMMAND
The server key is a private key that is never shared outside the switch.
The host key is shared with the SSH client, and is fixed at 1024 bits.
E
XAMPLE
M
ODE
U
SAGE
The SSH server supports up to four client sessions. The maximum
number of client sessions includes both current Telnet sessions and
SSH sessions.
The SSH server uses DSA or RSA for key exchange when the client first
establishes a connection with the switch, and then negotiates with the
client to select either DES (56-bit) or 3DES (168-bit) for data
encryption.
You must generate DSA and RSA host keys before enabling the SSH
server.
Console#ip ssh crypto host-key generate dsa
Console#configure
Console(config)#ip ssh server
Console(config)#
C
OMMANDS
ip ssh server-key size key-size
no ip ssh server-key size
key-size – The size of server key. (Range: 512-896 bits)
S
ETTING
M
ODE
U
SAGE
Console(config)#ip ssh server-key size 512
Console(config)#
– 721 –
| Authentication Commands
C 25
HAPTER
Secure Shell