Edge-Core ECS4810-12M Layer 2 Management Manual page 92

| Using the Web Interface
C 3
HAPTER
Navigating the Web Browser Interface
Table 6: Switch Main Menu (Continued)
Menu
Show
Add Member
Show Member
Show Information
Configure Interface
Configure
Show Information
Traffic
Rate Limit
Storm Control
Priority
Default Priority
Queue
Trust Mode
DSCP to DSCP
Configure
Show
CoS to DSCP
Configure
Show
PHB to Queue
Configure
Show
DiffServ
Configure Class
Add
Show
Modify
Add Rule
Show Rule
Configure Policy
Add
Show
Modify
Description
Configures global settings for an MST instance
Adds VLAN members for an MST instance
Adds or deletes VLAN members for an MST instance
Displays MSTP values used for the bridge
Configures interface settings for an MST instance
Displays interface settings for an MST instance
Sets the input and output rate limits for a port
Sets the broadcast storm threshold for each interface
Sets the default priority for each port or trunk
Sets queue mode for the switch; sets the service weight for each
queue that will use a weighted or hybrid mode
Selects DSCP or CoS priority processing
Maps DSCP values in incoming packets to per-hop behavior and
drop precedence values for internal priority processing
Shows the DSCP to DSCP mapping list
Maps CoS/CFI values in incoming packets to per-hop behavior and
drop precedence values for priority processing
Shows the CoS to DSCP mapping list
Maps internal per-hop behavior values to hardware queues
Shows the PHB to Queue mapping list
Creates a class map for a type of traffic
Shows configured class maps
Modifies the name of a class map
Configures the criteria used to classify ingress traffic
Shows the traffic classification rules for a class map
Creates a policy map to apply to multiple interfaces
Shows configured policy maps
Modifies the name of a policy map
– 92 –
Page
232
232
232
236
236
236
239
241
243
244
250
251
251
251
253
253
253
247
247
247
257
258
258
258
258
258
258
262
262
262
262