Host Table; To Edit A Rule - Black Box Advanced Console Server User Manual

2. Select the chain to which you want to add a rule from Chain list, and then
3. Click the "Add Rule" button.
4. Configure the rule as desired.
5. Click OK.
6. Click "apply changes."

To Edit a Rule

1. Go to Network > Firewall Configuration
2. Select the chain that you want to edit from the list and click the "Edit
3. Select the rule to be edited from the Rules list, and then click the "Edit"
4. Modify the rule as desired.
5. Click OK.
6. Click "apply changes."

Host Table

The Host Table form enables you to keep a table of host names and IP
addresses that comprise your local network, and provide information on your
environment.
Selecting Network > Host Tables brings up the form shown in the following
figure.
BLACK BOX® CS Installation, Administration, and User's Guide
click the "Edit Rules" button.
The "Add Rule" dialog box appears.
For definitions of the fields in this form see "Firewall Configuration" on
page 186.
Rules" button.
The "Edit Rules" form appears.
button.
The "Edit Rule" dialog box appears.
For definitions of the fields in this form see "Firewall Configuration" on
page 186
Network
201