Figure 7-22: Expert > Serial Port > Power Management > User; To Configure A User For Ipdu Power Management While Connected To A Serial Port - Black Box Advanced Console Server User Manual

7. Enter the power management hot key in the "Power Management Key"
To Configure a User for IPDU Power Management While
Connected To a Serial Port
Perform this procedure to allow a user to perform power management for a
device while connected to the device through one of the CS's serial ports.
1. To allow everyone with access permissions for this port to perform power
2. To restrict power management on this port to a restricted list of users
Figure 7-22: Expert > Serial Port > Power Management > User Permissions
3. Enter a valid username or groupname in the "New User/Group" field, and
4. Click "Done."
5. Click "apply changes."
BLACK BOX® CS Installation, Administration, and User's Guide
The power management port and the specified outlet numbers display on
the PowerMgmt Port list.
field.
Enter a caret (^) for the escape key, as in ^p. The caret stands for the
Ctrl key.
management on this port, click the "Allow All Users" radio button.
authorized to access this port, click the "Allow Users/Groups."
click "Add."
Applications
145