Table of Contents
Advertisement
ServTray
™
Control your rack- or cabinet-mounted PS/2 server
with the compact, easy-to-use ServTray.
Consists of a keyboard, mouse, 15" or 17" LCD panel, and KVM module
housed in an industry-standard 19", 1U-height rack drawer.
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
Customer
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Support
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Information
Web site: www.blackbox.com • E-mail: info@blackbox.com
BLACK BOX
KVT201A-JP-R3
KVT202A-JP-R3
®
Advertisement
Table of Contents
Related Manuals for Black Box ServTray KVT201A-JP-R3
Summary of Contents for Black Box ServTray KVT201A-JP-R3
- Page 1 Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) Customer FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Support Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Information Web site: www.blackbox.com • E-mail: info@blackbox.com...
- Page 2 ServTray Federal Communications Commission and Industry Canada Radio Frequency Interference Statements Class B Digital Device. This equipment has been tested and found to comply with the limits for a Class B computing device pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a res- idential installation.
-
Page 3: Instrucciones De Seguridad
NOM Statement Instrucciones de Seguridad (Normas Oficiales Mexicanas Electrical Safety Statement) 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. - Page 4 ServTray Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks, and ServTray and ServSwitch are trademarks, of BB Technologies, Inc. Centronics is a registered trademark of Centronics Corporation. UL is a registered trademark of Underwriters Laboratories Inc.
-
Page 5: Table Of Contents
2.1 Introduction ......................................7 2.2 What’s Included ....................................7 2.3 Rear Bracket Extensions ..................................8 3. Assembly and Installation ..................................10 4. Operation ........................................16 5. Troubleshooting ......................................17 5.1 Calling Black Box ....................................17 5.2 Shipping and Packaging ................................... 17 724-746-5500 | blackbox.com Page 5... -
Page 6: Specifications
ServTray 1. Specifications Approvals: CE, FCC for the product; UL , TUV, CE for power supply ® Active Display Area: KVT201A-JP-R3: 9"H x 12"W (22.8 x 30.4 cm); KVT202A-JP-R3: 10.6"H x 13.3"W (27 x 33.8 cm) Pixel Pitch: KVT201A-JP-R3: 0.297 mm (H) x 0.297 mm (V); KVT202A-JP-R3: 0.264 mm (H) x 0.264 mm (V) Resolution: KVT201A-JP-R3: 1024 x 768 @ 60 Hz;... -
Page 7: Overview
Chapter 2: Overview 2. Overview 2.1 Introduction Control your rack- or cabinet-mounted PS/2 server with the compact, easy-to-use ServTray. It consists of a keyboard (Japanese version), mouse, LCD panel, and KVM module housed in an industry-standard 19", 1U-height console drawer (see Figure 2-1). Two models are available: the ServTray with a 15"... -
Page 8: Rear Bracket Extensions
ServTray 2.3 Rear Bracket Extensions Figure 2-2 shows the rear bracket pair, and Figures 2-3 and 2-4 show the ServTray in its maximum and minimum extension positions. Figure 2-2. Rear bracket pair. NOTE: The following length is the depth measured between the front pole and rear pole inside a 4-post rack or cabinet, not the outside depth of the enclosure. - Page 9 Chapter 2: Overview Open rack Open rack ServTray Figure 2-5. ServTray installed on an open rack. 724-746-5500 | blackbox.com Page 9...
-
Page 10: Assembly And Installation
ServTray 3. Assembly and Installation 1. Choose a proper position in the cabinet for the console drawer. 2. Using four 0.12" x 0.24" countersunk screws (included), attach the extensions (included with your ServTray Kit) to both sides of the KVM switch module. See Figures 3-1 through 3-5. The wide-edged plastic extension should be on the top side (see Figure 3-5). - Page 11 Chapter 3: Assembly and Installation Extension Switch module Figure 3-3. Attaching an extension to one side of the KVM switch module. Switch module Extension on side of switch module Figure 3-4. KVM switch module with extensions attached. 724-746-5500 | blackbox.com Page 11...
- Page 12 ServTray The wide-edged plastic extension should be on the top side. Figure 3-5. Back view of module with extensions attached. 3. Using four cabinet screws (included), screw the console drawer onto the rack. See Figures 3-6 and 3-10. WARNING: Do not remove the safety stopper until you complete the assembly. Console drawer Safety stopper Figure 3-6.
- Page 13 Chapter 3: Assembly and Installation Rear bracket ServTray Rear bracket Bracket track Figure 3-7. Install the rear bracket onto the ServTray. 5. Push the KVM switch module evenly towards the drawer. See Figure 3-8. Figure 3-8. Pushing the module towards the console drawer. 724-746-5500 | blackbox.com Page 13...
- Page 14 ServTray 6. Slide the console drawer out and tightly fasten the screw to the module. See Figure 3-9. Thumbscrews KVM module Console drawer Figure 3-9. Fasten the screw to the module. 7. Remove the safety stoppers from the front sides of the drawer (left and right) in sequence. See Figure 3-10. Console drawer Safety stopper Figure 3-10.
- Page 15 Chapter 3: Assembly and Installation 8. Once the ServTray is installed in the rack or cabinet, you can connect it to a computer. The KVM module’s connectors attach to the KVM connectors on a PS/2 CPU via the CPU cable (included) shown in Figure 3-11. CPU cable (included) HD15 male (2) 6-pin mini DIN...
-
Page 16: Operation
ServTray 4. Operation Once the ServTray is installed and connected to a PS/2 CPU or ServSwitch, it’s ready for operation. Control the unit via the but- tons on the LCD panel (labeled 1 and 2 in Figure 4-1) and the LCD panel power switch (labeled 3 in Figure 4-1). Monitor the sta- tus via the keyboard status keys (labeled 4, 5, and 6 in Figure 4-1). -
Page 17: Troubleshooting
• Package it carefully. We recommend that you use the original container. • If you are shipping the ServTray for repair, make sure you include everything that came in the original package. Before you ship, contact Black Box to get a Return Authorization (RA) number. 724-746-5500 | blackbox.com... - Page 18 About Black Box Black Box Network Services is your source for more than 118,000 networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 20 seconds or less.