Wizard Mode; Expert Mode; Figure 4-5: Example Of Web Manager Form In Wizard Mode - Black Box Advanced Console Server User Manual

Web Manager for Administrators

Wizard Mode

The Wizard mode is designed to simplify the setup and configuration process
by guiding the administrator through six configuration steps.
When you log in to CS as an administrator or as a user with administrative
privileges, by default the system point to Expert Mode>Ports>Ports Status
form. To change to the Wizard Mode, click on the "Wizard" button located in
the left bottom corner of the menu panel.
Shown below is a typical form of the CS web interface in Wizard Mode. The
user entry form varies depending on the selected menu item.

Figure 4-5: Example of Web Manager Form in Wizard Mode

Expert Mode

Designed for advanced users, this is the default mode when you log in to the
CS. If you are in the "Wizard" mode, you can change to "Expert" mode by
clicking on the "Expert' button at the left bottom corner of the menu panel.
Shown below is a typical CS screen in Expert Mode. The main difference in
the interface when you switch between the two modes, is the addition of a top
74