Configuring the CS in Expert Mode
Table 6-6: Administration
Menu Selection
Time/Date
Boot Configuration
Backup Configuration Use a FTP server to save and
Upgrade Firmware
Reboot
Online Help
112
Use this menu to:
Set the timezone and configure the
system's Date and Time.
Network Time Protocol (NTP) can
also be used.
Configure CS to boot from its
internal firmware or from the
network.
Defines the settings for loading the
operating system in the event that
the CS fails to boot successfully.
The BLACK BOX® CS can boot
from its internal firmware or from
the network. This section
configures the required parameters.
retrieve your CS configuration; use
a storage device to store your
configuration.
Upload/upgrade new firmware.
Reboot the CS system.
Configure a path to a local server
for storing the online help files.
Where Documented
Chapter 11, Page 305
Chapter 11, Page 307
Chapter 11, Page 310
Chapter 11, Page 313
Chapter 11, Page 316
Chapter 11, Page 317
Need help?
Do you have a question about the Advanced Console Server and is the answer not in the manual?