The following table describes the available fields and buttons in the "Backup
Config" form if "FTP" is selected.
Table 11-8: Expert > Backup Config Type FTP Form Fields and Buttons
Field
Server IP
Path and
Filename
Username and
Password
Save
Load
When "Storage Device" is selected from the "Type" pull-down menu , the
following form appears.
BLACK BOX® CS Installation, Administration, and User's Guide
Definition
IP address of an FTP server on the same subnet as the
CS. (Verify accessibility by pinging the FTP server.)
Path of a directory on the FTP server where you have
write access for saving the backup copy of the
configuration file. Specify a filename if you want to
save the file under another name. For example, to save
the configuration file zvmppcbb.0720.bb in a
directory called "/upload" on the FTP server, you
would enter the following in the "Path and Filename"
field:
/upload/zvmppcbb.0720.bb
Obtain the username and password to use from the FTP
server's administrator.
Saves the configuration
Downloads a previously saved copy of the
configuration file from the selected device.
311
Need help?
Do you have a question about the Advanced Console Server and is the answer not in the manual?