To Configure Terminal Server Connection Options - Black Box Advanced Console Server User Manual

Ports Menu & Forms
3. To change the port number for the serial port, enter another number in the
4. To assign a name to the port's IP address, enter an alias in the "Port IP
5. If connecting to a Microsoft Windows Server 2003 operating system
6. If using AlterPath Bio for an additional layer of security, enable
7. To change the keep-alive interval, enter another number in the "TCP
8. To change the idle timeout interval, enter another value in the "Idle
9. Specify stty options, if desired, in the "STTY Options" field.
10. To change the break interval, enter a new number in the "Break Interval"
11. To change the break sequence, enter a new sequence in the "Break
12. To change the content of the login banner, enter new content in the "Login
13. Click "Done."
14. Click "apply changes."

To Configure Terminal Server Connection Options

Do this procedure if you have connected a computer terminal to a serial port.
1. Select the port and choose a terminal server (TS) profile from the
2. Select the "Other" tab.
280
"TCP Port" field.
Alias" field. (Console connection protocol only)
through the Emergency Management Services (EMS) console, enable the
"Windows EMS". (Console connection protocol only)
"Biometric Authentication Required" field. (Console SSH connection
protocol only)
Keep-alive Interval" field.
Timeout" field.
field.
Sequence" field.
Banner" field.
"Connection Protocol" drop-down menu on General form.
The Other form appears.