Configuring Authentication Servers For Logins To Cs And Connected Devices; Figure 9-6: Expert > Security > Authentication > Authtype Form; To Configure The Cs Login Authentication Method - Black Box Advanced Console Server User Manual

Security Menu & Forms
Figure 9-6: Expert > Security > Authentication > AuthType Form
Any authentication method selected for CS is used for authentication of any
user attempting to log into the CS through Telnet, SSH, or the Web Manager.

To Configure the CS Login Authentication Method

1. Go to Security > Authentication.
2. To specify an authentication method for login to CS, select a method from
3. Click "apply changes."
4. Make sure an authentication server is specified for the selected
Configuring Authentication Servers for Logins to CS
and Connected Devices
If you are configuring any authentication method other than Local, make sure
an authentication server is set up for that method.
216
The "AuthType" form displays, as shown in the figure 9-6.
the "Unit Authentication" pull-down menu.
authentication type.