To Delete, Add, Or Edit An Ipmi Device To Enable Or Disable Ipmi Power Management - Black Box Advanced Console Server User Manual

Applications Menu & Forms
Button
To Delete, Add, or Edit an IPMI Device to Enable or Disable
IPMI Power Management
1. Go to Applications> IPMI Power Mgmt.
2. To delete a previously added IPMI device, click the "Delete" button on
3. To add a device, click the "Add" button, and perform the following steps.
142
Purpose
When the status is unknown, a question mark appears
instead of the light bulb. A question mark indicates
either of the following conditions.
• The device was added or deleted and the changes
• The device did not answer IPMI requests.
Turn power briefly off and then on again
Add and configure a new IPMI device.
Select an IPMI device to review or change its
configuration.
Delete an IPMI device.
The IPMI Power Management form appears.
the line with the device's name.
a. Enter an alias for the device in the "Alias:" field, if desired.
b. Enter the IP address of the IPMI device in the "IP Address" field.
c. Choose an authentication type, if desired, from the "Authentication
Type" pull-down menu.
d. Choose a user permission type from the "Access Level" pull-down
menu.
The default is "User."
e. Enter a Username.
were not saved.