General; To Enable Or Disable Serial Ports - Black Box Advanced Console Server User Manual

To Configure Multiple Sessions and Port Sniffing for One or More Serial
Ports
To Configure a Serial Port for IPDU or IPMI Power Management
To Configure a User for IPDU Power Management While Connected To a
Serial Port
To Configure TCP Port Number, STTY Options, Break Interval, and the
Login Banner for a Serial Port Connected to a Console

To Enable or Disable Serial Ports

Go to Ports > Physical Ports, and select a port or ports to modify.
1
To enable selected ports, click the "Enable Selected Ports" button.
2
To disable selected ports, click the "Disable Selected Ports" button.
3
Note: By default, all Serial Ports are disabled from the factory. The Administrator
can activate and assign specific users to individual physical ports.
Click "apply changes."
4

General

Under Ports > Physical Ports in Expert Mode, if you select one or more ports
from the ports list and click the Modify button, the General form appears as
shown in the following form.
BLACK BOX® CS Installation, Administration, and User's Guide
Page 270
Page 274
Page 276
Page 279
241