To Assign Names To Slave Ports In The Cluster - Black Box Advanced Console Server User Manual

Ports Menu & Forms
4. Enter the "Local IP" address.
5. Enter the "First Local TCP Port Number".
6. Enter the "Remote IP" address.
7. Enter the "First Remote TCP Port Number".
8. Select the communication protocol between the master and the slave from

To Assign Names to Slave ports in the Cluster

Pressing the "Port Names" button on the New/Modify Port dialog box, brings
up the form shown in the following figure.
286
This is the first port number on the master, after the last port number on
the master.
This is the IP address of the master.
This is the first TCP port number on the master, after the last port number
on the master.
This is the IP address of the slave.
This is the first TCP port number of the slave. The default is 7001.
the "Protocol" pull-down menu.
The options are Telnet or SSH.