Step 4: Access - Black Box Advanced Console Server User Manual

3. To change the parity, select "None," "Odd" or "Even" from the "Parity"
4. To change the baud rate, select an option from 2400 to 921600 Kbps from
5. To change the data size, select an option from 5 to 8 from the "Data Size"
6. To change the stop bits, select 1 or 2 from the "Stop Bits" pull-down
7. To change whether authentication is required, check the "Authentication
8. Select "apply changes' to save configuration to Flash.
9. Select the "Next" button or proceed to the next section, "Step 4: Access."

Step 4: Access

Selecting "Step 4: Access" brings up a form shown in the following figure,
which allows you to add or delete user accounts, and set or change existing
passwords.
In addition, administrative privileges can be granted to added users by adding
the user accounts to an "admin" group, enabling them to administer the
connected devices without the ability to change the configuration of the CS.
By default any user can access any port as long as they have a valid user ID
and password.
BLACK BOX® CS Installation, Administration, and User's Guide
pull-down menu.
The default is "None."
the "Baud Rate" pull-down menu.
The default is 9600, which is the most common baud rate for devices.
pull-down menu.
The default is 8.
menu.
The default is 1.
Required" checkbox for enabled or leave it unchecked for disabled.
91