Table of Contents
Advertisement
Host Table Setup
In order for your Terminal Server to connect easily to machines on the network it must know
the IP addresses of the other computers. The Terminal Server can have its own internal table
of IP addresses set up in the host table. This is a 'local' naming system only. Your Terminal
Server can also use the name server utility of your Unix system (consult your Unix system
manual and
The Host Address Menu is accessed from the Administration Menu by selecting the host
entry. The host table can contain up to 10 addresses. Each entry consists of a host name and
its corresponding IP address.
You can fill in an entry (both the name and the IP Address) for your host machines and then
save the values by pressing the Enter key.
Terminal Server User Guide
Host Table Setup
Tips
on page 57).
Page 54
Chapter 3 Terminals on mutli-user systems
Advertisement
Table of Contents
