Installation and Configuration
2. If JRE is already installed on your system and you just want to activate
Basic Installation Procedures
The following table lists the basic installation tasks in the order in which they
should be performed and shows the page numbers where the tasks are
described in more detail.
Table 2-3: CS Basic Installation Tasks
Task
Mount the CS
Make an Ethernet connection
Connect servers and other devices to be
managed through the CS
Make a direct (terminal) connection to
prepare CS for basic network configuration
Power on the CS and the connected devices "Powering on the CS and the Connected
Perform basic network configuration
Select a security profile using the web
manager
34
If needed, download the JRE from
automatically checks your configuration and installs the latest version of
JRE if one is not available.
your browser, do the following steps.
a. Go to your system's Control Panel > Java Plug-in > Browser
b. Enable the browser(s) for Java Plug-in.
c. Test your browser(s) to see if the correct Java Plug-in is being used.
http://java.com.
Where Documented
"Mounting the CS" on page 35
"Making an Ethernet Connection" on page 35
"Connecting Servers and Other Devices to
CS" on page 36
"Making a Direct Connection to Configure the
Network Parameters." on page 37
Devices" on page 37
"Performing Basic Network Configuration
Using the wiz Command" on page 38
"Selecting A Security Profile Using the Web
Manager" on page 43
The web site
Need help?
Do you have a question about the Advanced Console Server and is the answer not in the manual?