Figure 9-10: Expert > Administration > Time/Date - Black Box Advanced Console Server User Manual

Security Menu & Forms
2. Make sure that time, date, and timezone settings are synchronized on the
Note: Kerberos authentication depends on time synchronization. Time and date
synchronization can be achieved by setting both CS and the Kerberos server
to use the same NTP server.
3. Set the timezone on CS by going to Administration > Time/Date in Expert
Figure 9-10: Expert > Administration > Time/Date
4. Go to Security > Authentication> Kerberos in Expert mode.
224
iv. Enter an optional alias in the "Alias" field.
CS and on the Kerberos server.
a. To specify an NTP server, see "To Configure Time and Date Using an
NTP Server" on page 306.
b. To manually set the time and date on the CS, see "To Manually Set
the Time and Date" on page 306.
c. Work with the Kerberos authentication server administrator to
synchronize the time and date between CS and the Kerberos server.
mode as per the following figure. The default is GMT.
The Kerberos form displays as shown in the following figure.