Step 2: Network Settings - Black Box Advanced Console Server User Manual

Note: It is not possible to continue working in the Web Manager without selecting a
Security Profile. The following dialog box appears if you try to navigate to
other sections of the Web Manager.
5. Once you select a security profile or configure a custom profile and apply
6. Select "apply changes" to save the configuration to Flash.
7. Login after Web Manager restarts and click on the "Wizard" button to
8. Proceed to "Step 2: Network Settings".

Step 2: Network Settings

Selecting "Step 2: Network Settings" brings up a form for reconfiguring
existing network settings. During initial setup of the CS, the administrator
configures the basic network settings that were required to enable logins
through the Web Manager. You can skip this step if the current settings are
correct.
BLACK BOX® CS Installation, Administration, and User's Guide
the changes, the CS Web Manager restarts in order for the changes to take
effect.
The following dialog box appears.
CS Web Manager restarts.
switch to Wizard mode.
85