Black Box Advanced Console Server User Manual page 305

2. To enable Power Management of a device connected to the current port
3. To enable IPMI Power Management of an IPMI device connected to the
BLACK BOX® CS Installation, Administration, and User's Guide
and plugged into a connected IPDU, click "Enable Power Management on
this port." and perform the following steps.
a. Select the name of a port configured for power management and click
the "Add" button.
The "Add Outlet" dialog box appears.
b. Enter the outlet number(s) into which the device is connected to
separated by commas.
c. Click OK.
The power management port and the specified outlet numbers display
on the PowerMgmt Port list.
d. Enter the power management hot key in the "Power Management
Key" field.
Enter a caret (^) for the escape key, as in ^p. The caret stands for the
Ctrl key.
• If you want to configure IPMI power management on this port,
continue to Step 3.
• If you are done, go to Step 4.
currently selected port, do the following steps.
This procedure assumes you have added the connected IPMI device in the
Applications > IPMI Power Mgmt. form.
a. Click the "Enable IPMI on this port" checkbox
The "IPMI key" and "IPMI Server" fields appear.
b. Enter a key in the IPMI key field.
Enter the key combination in the IPMI key field with ^, as in ^i. The
caret (^) stands for the Ctrl key.
The administrator of the device connected to this serial port uses this
hot key to bring up the IPMI power management screen.
c. Select the name of the IPMI device from the "IPMI Server" pull-
down menu.
275