Description Of Forms In Expert Mode; Table 6-2: Expert > Applications - Black Box Advanced Console Server User Manual

Configuring the CS in Expert Mode

Description of Forms in Expert Mode

The following table briefly describes the functionality of each menu and the
related forms. For detailed procedures refer to the page where documented for
each section.
Table 6-2: Expert > Applications
Form
Connect
IPDU Power Mgmt.
IPDU Multi-Outlet
Ctrl
IPMI Power Mgmt.
Terminal Profile
Menu
108
Use This Form To:
Connect to the CS shell through a secure
SSH session, or connect to a specific serial
port.
Manage power outlets on the AlterPath
PM family of Intelligent Power
Distribution Units. From here you may
power remote machines on and off, check
the status and lock the power outlet in the
on or off state to prevent accidental
changes.
Manage all power outlets of a multi-outlet
device connected to the AlterPath PM
family of Intelligent Power Distribution
Units in one single operation.
Manage IPMI devices. Power on and off
remote machines, and check their current
status.
Configure a menu of commands that will
be presented to the user when they power
on their computer terminal and login to the
CS. This is a special application used only
when the CS is being used as a server with
terminals attached.
Where
Documented
Chapter 7, Page 116
Chapter 7, Page 120
Chapter 7, Page 133
Chapter 7, Page 139
Chapter 7, Page 146