Sensor (Booklet Unit Media Exit) Removal - Lexmark C950 Service Manual

5058-030
Disconnect the connector from the sensor (booklet unit interlock).
4.
5. Remove sensor (booklet unit interlock) (A).

Sensor (booklet unit media exit) removal

Remove the booklet unit assembly. See
1.
Remove the booklet unit assembly left cover. See
2.
page 4-259.
Remove the screw securing the Sensor (booklet unit media exit) bracket from the booklet unit assembly.
3.
Disconnect the connector from the Sensor (booklet unit media exit) (A).
4.
Remove the screw securing the Sensor (booklet unit media exit) (A) from the bracket.
5.
Service Manual
4-314
Rear
"Booklet unit chassis removal" on page
"Booklet unit assembly left cover removal" on
A
Connector
4-260.
Previous
Next
Go Back