RIP card chassis bracket removal
1.
Remove the rear RIP card cover. See
2.
Disconnect the seven connections from the RIP card assembly (A).
3.
Remove the two screws securing the RIP card chassis bracket (B) to the frame.
4.
Slide the RIP card chassis bracket (B) to the left and out of the frame.
Warning: Do not drop the RIP card chassis bracket, or damage will occur.
connectors
B
5.
Remove the RIP card chassis bracket assembly.
"Rear RIP card cover removal" on page
A
connectors
7500-432, -632, and -832
4-13.
4-127
Repair information
Previous
Next
Go Back