Table of Contents
Advertisement
Main power switch removal
Remove the rear upper cover. See
1.
2.
Remove the rear lower cover. See
Remove the printer right cover. See
3.
Remove the LVPS front fan guide. See
4.
Remove the waste toner sensor guide. See
5.
Remove the LVPS. See
6.
7.
Remove the printer front door. See
Remove the transfer belt cleaner. See
8.
Remove the inner cover.
9.
Remove the two screws (A) securing the main power switch to the machine.
10.
11.
Remove the main power switch.
Media feed lift motor removal
1.
Remove the appropriate feeder unit. See
media feeder removal" on page
tray 3 feeder removal" on page
Remove the two screws (A).
2.
Disconnect the cable (B).
3.
"Rear upper cover removal" on page
"Rear lower cover removal" on page
"Printer right cover removal" on page
"LVPS front fan guide removal" on page
"Waste toner sensor guide removal" on page
"LVPS PCBA removal" on page
"Printer front door removal" on page
"Transfer belt cleaner removal" on page
"Inner cover removal" on page
"Printer tray 1 feeder removal" on page
4-281,
"TTM tray 4 media feeder removal" on page
4-290.
4-19.
4-17.
4-14.
4-111.
4-112.
4-13.
4-178.
4-4.
4-144,
Repair information
7558-xxx
Previous
Next
4-196.
Go Back
"Tray module
4-294, or
"TTM
4-121
Advertisement
Table of Contents
