5058-030
Release the hooks securing the sensor (stapler carriage HP) (A) to the stapler carriage assembly (B).
7.
Remove the sensor (stapler carriage HP) (A).
8.
Sensor (upper media bin full) removal
Open the finisher front door assembly.
1.
Remove the screw securing the bracket (A) to the upper media bin vertical cover (B).
2.
Move the bracket frontward and downward to gain access to the harness and connector.
3.
Release the harness from the clamp.
4.
Service Manual
4-332
B
A
Previous
Next
Go Back