Mfp Stapler Assembly Sensor (Bin Full Receive) Removal - Lexmark MB790MFP Service Manual

7462
2. Remove the two screws (A) securing the staple finisher sensor (bin full send).
3. Disconnect the harness and remove.

MFP stapler assembly sensor (bin full receive) removal

1. Remove the right cover. See
2. Remove the two screws (A) securing the sensor (bin full receive).
3. Disconnect the harness and remove.
4-218
Service Manual
"MFP stapler assembly right cover removal" on page
A
4-203.
A
Previous
Next
Go Back