Sensor (Toner Density) Removal - Lexmark MX81 Series Service Manual

12
Disconnect the cable from the sensor (input).
13
Release the hooks (A) securing the sensor (input) to the machine.
14
Remove the sensor (input).

Sensor (toner density) removal

1
Remove the left cover. See
2
Remove the controller board access shield. See
3
Remove the media tray. See
4
Remove the front door. See
"Left cover removal (MX71x)" on page
"Controller board access shield removal" on page
"Media tray removal" on page
"Front door removal" on page
Repair information
336
301.
374.
316.
7463
388.