NEC Univerge SV8100 Features And Specifications Manual page 512

Issue 13.0
Program
Program Name
Number
24-02-07 System Options for Transfer –
Trunk-to-Trunk Transfer Release
Warning Tone
24-02-10 System Options for Transfer –
Disconnect Trunk-to-Trunk
25-07-07 System Timers for VRS/DISA –
Long Conversation Warning
Tone Time
2 - 478
Description/Comments
This timer starts when a trunk
begins talking with another trunk
(for example: Trunk-to-Trunk
Transfer/Tandem Trunking). When
this time expires, a warning tone is
heard. If Program 24-02-10 is set,
the conversation disconnects after
that time expires. This timer is set
again when the external digit time
expires. One of the trunks used
must be an analog trunk (or leased
line).
This applies to manually

transferred Tandem Trunk
and DISA calls.
Determine the time a conversation
continues after the time in
Program 24-02-07 expires. If this
option is set to 0, the conversation
is disconnected immediately. This
program has no affect if Program
24-02-07 is set to 0. One of the
trunks used must be an analog
trunk (or leased line).
This applies to manually

transferred Tandem Trunk
and DISA calls.
Determine the time the system
waits before disconnecting a DISA
or any automatically transferred
trunk-to-trunk (such as Tandem
Trunking) call after the Long
Conversation tone is heard.
If Program 25-07-08 is set to 0, the
call is disconnected after the time
expires. This timer is set again
when the external digit time
expires.
 This applies to automatically
transferred Tandem Trunk
and DISA calls.
UNIVERGE SV8100
Assigned Data
0~64800 (seconds)
(default = 1800)
0~64800 (seconds)
(default = 0)
0~64800 (seconds)
(default = 3600)
Direct Inward System Access (DISA)
Level
1 2 3


