NEC Univerge SV8100 Features And Specifications Manual page 213

UNIVERGE SV8100
Department Calling
Direct Station Selection (DSS) Console
Do Not Disturb
Programmable Function Keys
Voice Response System (VRS)
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-10-06 Service Code Setup (for System
Administrator) – Setting the
Automatic Transfer for Each
Trunk Line
11-10-07 Service Code Setup (for System
Administrator) – Canceling the
Automatic Transfer for Each
Trunk Line
11-10-08 Service Code Setup (for System
Administrator) – Setting the
Destination for Automatic Trunk
Transfer
11-10-18 Service Code Setup (for System
Administrator) – Off-Premise
Call Forward by Door Box
11-11-01 Service Code Setup (for Setup/
Entry Operation) – Call Forward
– All
11-11-02 Service Code Setup (for Setup/
Entry Operation) – Call Forward
– Busy
Call Forwarding
Description/Comments
Set the service code for setting
automatic transfer for each trunk
line.
Set the service code for canceling
automatic transfer for each trunk
line.
Set the service code for setting the
destination for automatic trunk
transfer.
Set the service code for setting
automatic transfer for each trunk
line.
Set the service code for setting call
forwarding all calls.
Set the service code for setting call
forwarding for busy calls.
Assigned Data
1
MLT
(default = 733)
MLT
(default = 734)
MLT
(default = 735)
MLT
(default = 722)
MLT, SLT
(default = 741)
MLT, SLT
(default = 742)
Issue 13.0
Level
2 3






2 - 179