NEC Univerge SV8100 Features And Specifications Manual page 181

UNIVERGE SV8100
Park
Programmable Function Keys
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-12-08 Service Code Setup (for Service
Access) – Barge-In
11-16-02 Single Digit Service Code Setup
– Barge-In
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
Barge-In
Description/Comments
Determine what the service code
should be for an internal party to
use the Barge-In feature.
Set up Item 02 for single digit
Barge-In. For example, you can
assign Item 02 to use digit 5 for
Barge-In. This allows you to
program a function key with an
extension number plus the
Barge-In code (i.e., 5). This allows
one-touch access to the Barge-In
feature for extension.
Assign a function key for Barge-In
(code 34).
Optional additional data can be
assigned as extension number

or (Version 5000 or higher
required).
Assign a Class of Service (1~15)
to an extension.
Assigned Data
1
MLT, SLT
(default = 710)
(default not assigned)

Line Key 1~48
0~99 (Normal Function
Code 751 by default)

 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension port
= Class 1
Issue 13.0
Level
2 3

2 - 147