NEC Univerge SV8100 Features And Specifications Manual page 485

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

UNIVERGE SV8100
Program
Program Name
Number
25-04-01
VRS/DISA Transfer Ring Group
With No Answer/Busy
25-05-01
VRS/DISA Error Message
Assignment
25-06-02
VRS/DISA One-Digit Code
Attendant Setup – Destination
Number
25-07-01
System Timers for VRS/DISA –
VRS/DISA Dial Tone Time
Direct Inward Dialing (DID)
Description/Comments
For each trunk port (001~200), set
the operating mode of each DISA
trunk. This sets what happens to
the call when the DISA or
Automated Attendant caller calls a
busy or unanswered extension.
The call can either disconnect (0)
or Transfer to an alternate
destination (a ring group, In-Skin/
External, Centralized). When
setting the DISA and DID
Operating Mode, you make an
entry for each Night Service mode.
For each trunk that is answered by
the VRS, enter the VRS message
(1~48) the outside caller hears if
they dial incorrectly after answer. If
you enter 0, the call reroutes
according to Program 25-03 and
Program 25-04. Make one entry
for each Night Service mode.
Set up single digit dialing for
Automated Attendant callers. For
each VRS Message programmed
to answer outside calls, specify:
The digit the Automated
Attendant caller dials (1~12,
where 10 = 0, 11 = and 12 =
#
). (Keep in mind that if you
assign destinations to digits
three and four, outside callers
cannot dial system extensions
that begin with that digit.)
The destination reached (four
digits maximum) when the
caller dials the single digit
code.
After answering a VRS/DISA
trunk, the system waits this time
for the caller to dial the first digit of
the DISA password. If the caller
fails to dial in this time, the system
drops the call.
Assigned Data
1
Ring Groups:
1~100
Trunk Ports:
001~200
Day/Night Mode:
1~8
0 (Disconnect)
1~100 (Incoming Ring
Group)
102 (In-Skin/External
Voice Mail or VM8000
InMail)
104 (Speed Dial table
Program 25-15-01)
Version 3000 software
or higher is required.
(default = 0)
0~100 (0 = No Setting)
(default = 0)
Up to eight digits
(default not assigned)
0~64800 (seconds)
(default = 10)
Issue 13.0
Level
2
3
2 - 451

Advertisement

Table of Contents
loading

Table of Contents