NEC Univerge SV8100 Features And Specifications Manual page 511

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

UNIVERGE SV8100
Trunk Continue/Disconnect Codes:
Program
Program Name
Number
14-01-25
Basic Trunk Data Setup –
Continued/Discontinued
Trunk-to-Trunk Conversation
20-28-01
Trunk to Trunk Conversation –
Conversation Continue Code
20-28-02
Trunk to Trunk Conversation –
Conversation Disconnect Code
20-28-03
Trunk to Trunk Conversation –
Conversation Continue Time
22-07-01
DIL Assignment
Direct Inward System Access (DISA)
Description/Comments
When Program 24-02-10 is set to
disconnect a trunk after the
defined time, determine whether
or not a user should be able to use
the continue/disconnect code.
When Program 14-01-25 is
enabled, determine the 1-digit
code the user should dial (0~9, ,
#
) to extend the conversation for
the time defined in Program
20-28-03. If the Continue and
Disconnect codes are
programmed the same (e.g.,
the system follows the Continue
operation. Using the Continue
code before the warning tone is
heard has no action.
When Program 14-01-25 is
enabled, determine the 1-digit
code the user should dial (0~9, ,
#
) to immediately disconnect their
call. Using the Disconnect code
before the warning tone is heard
disconnects the call.
When Program 14-01-25 is
enabled, determine the time a call
is extended when the user dials
the Continue code (defined in
Program 20-28-01).
Assign the master/pilot number of
the voice mail group from Program
11-07-01 as the DIL destination. If
all Voice Mail ports are in the same
unique Extension (Department)
Group (see Program 16-02
above), the DIL rings another
Voice Mail port if its assigned port
is busy.
Assigned Data
0 = Disable (No)
1 = Enable (Yes)
(default = 0)
0~9, #, 
(default not assigned)
#
),
0~9, #, 
(default not assigned)
0~64800 (seconds)
(default = 0)
Extension Number
(maximum eight digits)
(default not assigned)
Issue 13.0
Level
1
2
3
2 - 477

Advertisement

Table of Contents
loading

Table of Contents